Investing in good-quality asphalting services in Penrith is essential to keep any asphalt construction in good condition. With timely maintenance and look after, any asphalt construction can stay in good condition for more than 20 years, but a significant stipulation here is timely look after and maintenance. This maintenance has to be done every couple of years, according to asphalt contractors, but I suggest keeping it more frequent, and inspection is something not to be missed out on at all.
A major issue that any asphalt surface faces is cracks getting developed, and they are not good for the overall health of any asphalt construction. They make way for the water to seep inside, and as a result, the surface begins to deteriorate and eventually break down. Asphalt patching is very useful as far as handling these cracks is concerned.
Top-rated asphalt contractors Penrith recommend taking the following steps upon noticing the cracks on any asphalt surface.
PREPARING THE AREA FOR TOUCHING
As mentioned above, patching is the most effective method to eliminate cracks from any asphalt surface. This patching is done after some preparation work, and the steps are listed below.
Clean the affected area to ensure that the patching material adheres easily
Use a hammer and chisel to remove the broken pieces of asphalt
Use a wire brush to remove dirt and debris from the crack
After these three steps, you must use a compressed air gun to blow away all the lost debris. Then, a garden hose will be needed to flush out the crack and clean it thoroughly. However, you must ensure that the area is completely dry before patching.
Professionals from asphalt companies in Australia care for their safety by equipping themselves with safety kits like safety goggles and rubber boots.
STEPS TO REPAIR SMALL CRACKS
The first step taken by top asphalt contractors in Penrith is using rubberised asphalt emulsion crack filler to fix small cracks. They ensure that the crack filler is not applied on unaffected areas, as it can stain the driveway. This is why asphalt contractors in Penrith use a caulking gun to apply this fill-up during asphalt services in Penrith.
Now, they use a trowel or a putty knife to smooth these cracks. Rubberised gloves are also effective in levelling the surface in case of their unavailability. Then, you must leave it to dry completely before using the prepared area. This drying will take almost a day or two, and you can use the surface quickly. But the layers beneath the top layer will take nearly two weeks to harden completely. It is recommended not to seal the driveway during this time as this will restrict the air from entering the area to dry the surface.
